-
Bow thruster
To use the bow thruster:
-
Turn the power on from the bow thruster switch on the main switch panel, and then from the joystick on the steering console.
-
For further instructions for use, see the manufacturer's manual.
Incorrect use may cause the bow thruster to overheat and shortcircuit.
-
Use the equipment only for short periods at a time.
-
Do not exceed the maximum amount of use indicated in the manufacturer's manual.
Do not touch the bow thruster if the Aux switch on the main switch panel is turned on.
The bow thruster unit is located under the front cabin beds. There is no need to access it in normal use. In case of a problem, always contact a professional boat service.
The device is connected to a heavy-duty fuse. In case of fuse overload, check the functioning of heavy-duty fuses from the holes in the fuse covers. If the metal strip inside is damaged, the fuse is tripped.
Changing tripped heavy-duty fuses yourself poses a risk of electric shock and serious injury.
-
Do not change a tripped fuse yourself but contact a qualified nautical electrician.
-
Even opening the cover is not recommended. If it is necessary to open the cover, make sure that all the current cables from the batteries are disconnected.
For more information, see the manufacturer’s manual.