It is recommended that you do not alter the 12 V electrical system or any related diagrams yourself but always turn to a qualified electrician specialized in marine electrical systems.
When installing retrofits to the boat:
-
Use the Aux circuits shown on the wiring diagram available in the Owner's Bag.
-
Make sure the device power supply is connected to the fuse.
-
Connect the device both to the power supply and the negative bar.
-
Never modify the rated current amperage of the over-current protective devices.
-
Never reset or replace electrical appliances with components exceeding the rated current amperage of the circuit.
-
Always check that the circuit is not damaged. Make sure there is no short circuit or a fire caused by possible defects in the circuit before connecting an electrical circuit.
-
Have damaged equipment serviced before putting it back in use.
The boat manufacturer disclaims any liability for retrofits or unauthorized modifications.