• Check the weather forecast. Assess its suitability for the boat's design category and your own boating skills.

• Have a personal flotation device for each passenger.

• Make sure you have a chart of the area and a compass.

• Check that the weight, including luggage, passengers and fuel will fit within the allowed load.

• The maximum number of passengers allowed on board will not be exceeded. 

• Everyone is wearing a personal flotation device.

• There are fire extinguishers and they have not expired.

• You have the necessary lines for mooring and an anchor.

• If there is a heater, there is sufficient ventilation and the heater exhaust pipe is not covered.

• Everyone on board has a clear understanding of the manouvering operations.

• There is no water, fuel or oil leaks in the bilge.

• The bilge pumps work.

• Deck draining system is clean and the seacocks are open.

• All deck hatches are tightly shut.

• All the lines and fenders are well fastened on the inside of the boat.

• The load is well distributed and heavy items are well secured low down.

• All loose equipment is well fastened, including lightweight items.

• There is enough fuel for the trip and an adequate amount of reserve fuel in case of bad weather or change of plans.

• There is no water in the fuel filter.

• There is enough diesel fuel, if you have a heater.

Before starting the engines:

• Check that the engines and propellers are free to move and rotate.

• Turn on the start, service and bow thruster main switches.

• Check that all the fuses are working.

• Check the functioning of the steering system.

• Remove the cable from the shore power supply.

• If the boat has an engine shut-off switch, attach it to yourself.

After the engines have started, check that the engine cooling water flows correctly.

Turn on and check the functioning of:

• The navigation lights and anchor light. If it is dark, turn them on.

• The navigation equipment.

• The bow thruster.