4.5.1 Navigational lights

Your boat is equipped with front navigation lights and an anchor light. The panel light ensures the visibility of the function panel keys in the dark.

The light switches are located on the function control panel at the steering console.

You must always have the navigation lights and anchor light on when travelling in the dark.

Installing the anchor light

The anchor light and the mast are stored in the aft storage box when not in use. The anchor light holder is on the starboard side of the aftdeck.  

Store the anchor light in the aft storage box when not in use. 

To set up the anchor light:

  1. Open the cap.

  2. Attach the mast onto the connection plug.

  3. Switch on the light from the function control panel in the steering console.

After using the light:

  1. Detach the mast from the base.

  2. Close the cap of the connection plug. 

The light can get damaged if water gets inside the connection.

Always close the cap carefully.

Troubleshooting

If the navigation and anchor lights do not work:

  1. Verify that the Service main switch is turned on.

  2. Check the fuses on the main switch panel.

  3. Change the bulb if broken.

See section 4.2.1 Main switch panel and fuses (12 V system) for more information.